Электронный архив
Донецкого национального технического университета (г.Донецк)
Electronic archive of Donetsk national technical university (Donetsk)
 

eaDonNTU, Donetsk >
Факультет инженерной механики и машиностроения >
Кафедра технологии машиностроения >
Научные публикации сотрудников кафедры ТМ >

Please use this identifier to cite or link to this item: http://ea.donntu.org/handle/123456789/29630

Title: Methods of improvement of hardness and/or efficiency of cutters with changeable cutting speeds along the cutting tooth edge length
Authors: Mikhailov, Dmitry Alexandrovich
Михайлов, Дмитрий Александрович
Al-Sudani, T. Tarafa
Petryaeva, Irina
Михайлов, Александр Николаевич
Mikhailov, Alexander Nikolaevich
Keywords: efficiency
uneven cutting speed
cutting tooth edge
cutter
function-oriented approach
Issue Date: 2015
Publisher: DonNTU
Citation: Methods of improvement of hardness and/or efficiency of cutters with changeable cutting speeds along the cutting tooth edge length / A. Mikhaylov, D. Mikhaylov, T. Al-Sudani // International Journal of Innovative and Information Manufacturing Technologies. - 2015. - № 2. - С. 25-29.
Series/Report no.: Number 2, (2015);5
Abstract: The article shows that one of the drawbacks of most cutters is uneven cutting speeds along the cutting tooth edge length resulting from the peculiarities of their construction and operation. Due to uneven cutting speeds cutting teeth edges of the cutters are worn irregularly which generally reduces operating parameters of cutters. This article provides data on improvement of hardness and/or efficiency of using cutters with changeable cutting speeds along the cutting tooth edge length which are based on the provision of changeable parameters of the cutting edge properties depending on the current operational functions. For proposed cutters with changeable properties along the length of the cutting teeth edge length there have been developed principles of improvement of hardness and/or efficiency on the grounds of function-oriented approach. There was made analysis of peculiarities of improvement of hardness and efficiency of cutters` work on the basis of these principles and there were given general recommendations on the operation of the proposed cutters.
URI: http://ea.donntu.org/handle/123456789/29630
ISSN: 2311-6765
Appears in Collections:Научные публикации сотрудников кафедры ТМ

Files in This Item:

File Description SizeFormat
25-29 MIKHAYLOV_MIKHAYLOV_AL-SUDANI_PETRYAEVA.pdf551.35 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.